Release Notes LTS Nov 2024

8 Nov 2024

Download version 4.0.7 - Ti5/Ti7

Download version 4.0.7 - Ti10

Tip:Click here for instructions on how to update the software version on your display.

This is our newest Long Term Support software version! We are delighted to share the newest features with you.

 

Upgrade Instructions

It is strongly recommended to use LTS versions for a more reliable operation. Updating it when reaching its end of life is also a good practice especially for applications that are connected to our cloud services.

Note: This Release Notes show all improvements made since the previous LTS version 4.0.7.

 

New Developments

We have added powerful new developments to enhance performance and usability. Here’s what’s new in this update.

Auto Steering Support for More Pre-Configured Machines

You can now use the Autopilot with Danfoss PVED-CLS and PVES valves.

Auto Steering Performance Data

The Auto Steering has new screens where it is possible to objectively evaluate its performance in every row it works. By using this data is possible to have improve tuning methods and compare performance under different circumstances which will lead to a better performance vehicle steering.

Pause During the Perimeter Creation

When creating a field map, driving through the perimeter and there is a obstacle on the way, it is now possible to pause the Perimeter creation, drive around it and resume the Perimeter creation. To use this feature, a button to pause the perimeter is available on the same position used to "play" the Perimeter.

 

Improvements

This update also includes refinements of existing features, improving performance and efficiency.

Global

  • TerraStar PPP accuracy and availability improvements during ionospheric scintillation events: The firmware demonstrated 60% TerraStar-C PRO accuracy improvements during peak scintillation events, resulting in an operational uptime of >90% for TerraStar-C PRO users operating in scintillation-impacted regions. For more information, check the bulletin.

  • Support for ECU ATCDv4.2.3.

  • Added notification for TerraStar subscription end and other improvements.

  • Support for SMART7 with RTK radio from Satel and dual antenna.

  • Added RTK ASSIST information to the operation screen GNSS icon.

  • Improved licenses names to be more representative.

  • Added full backup option.

  • General improvements to performance and reliability.

Auto Steering

  • Support for Track Controller Next-Gen: To use the Track Controller Next-Gen, it is mandatory to use version 3.32.0 or newer.

  • Improved rough terrain alarm sensitivity: Increased default threshold. It is still important to adjust the alarm threshold during the machine's installation as the cabin movements and safety requirements are different for each machine.

  • Improved rear detection: For better performance, set the speed filter as on and reduce the minimum speed to 1 km/h for simple point positioning and 0.5 km/h for PPP or RTK.

Planting Monitor

  • Enable monitoring up to 144 lines, with 8 Section Control ECU (ATMP)

ISOBUS TC and VT

  • Improved method to control sections: Whenever there is any part of a Section inside a prescription map, that Section will be open.

  • Improved screen resolution with split screen in Ti10.

Fertiliser

  • Improved experience to change the application width: Faster and uncomplicated way to change application width, through the Guidance menu.

  • Feedback when the discs are not rotating as expected: If the discs stop because of a harness issue or something blocking its rotation, the user will be warned.

 

Bug Fixes

This update addresses bugs to improve stability and reliability.

Global

  • General stability improvements.

  • GNSS info not updating when no satellite signal is available.

  • Display uninstallation bug: Uninstalling 4.8.0 to the previous LTS 4.0.x caused errors, USB diagnostic failure, and display freeze at startup. This has been fixed, restoring proper uninstallation, diagnostics, and reboot functions.

Ti10 and Ti5+

  • Stability fixes: Fixed issue that could make system slow or even crash after a long period of usage without restarting. Estimated time for crash as one day for Ti5+ and seven days for Ti10. Additionally, Remote Access has also improved stability for those products.

  • Ti10 working with NTRIP.

Fertiliser

  • Consistent information on prescription rate: The prescription rate used by each rate control will be the max prescription value read by the segment where this rate is applied. The Prescription rate shown on the screen is the average prescription from all rate controllers.

  • Warning pop up when discs are turned on for the first time always showing.

ISOBUS TC

  • Fixed issue when entering section control configuration screen and other minor fixes: The coverage painting would stop working after that.

Planting Assistant

  • ALIGN compatibility for older firmware: A bug caused continuous "INS solution not available" alarms when using ALIGN-based INS types with firmware older than 5.6.0. Now, the system correctly updates ALIGN status, eliminating false alarms and improving reliability.

 

Known issues

We’ve identified a few scenarios that might affect system behavior. These are being addressed to ensure an even better experience going forward.

  • Restoring a backup from a different model display will make the system crash.

  • Satellite count is always zero with OEM628 and NTRIP.

Tip: Have questions? Contact our support team!